FRAMED OPENINGS

Product Description

Description: This accessory is used to open portions of a wall that are normally used for access. Used to frame out doors, windows, louvers, and any other openings. Framed opening refers to the framing members and flashing which surround an opening. Framed Openings include: Jambs, Header or Sill, Trim, and fasteners.

Options: Double Header will provide a double header, used in the attachment of some roll-up doors. This second header must be field located.

Full Cover Trim: provides head and jamb cover trim and sill trim if applicable, so that no red iron is visible at the opening.

Finishes: Red Oxide Primer and Pre-galvanized finishes (Pre-Galvanized indicates that all of the jamb and header or sill material for this framed opening will be manufactured from pre-galvanized material.)

Limitations:With a by-pass girt condition the header has to drop 8" to 10" below the eave strut and with a flush girt condition the header only has to drop 3 1/2" below the eave strut. The jamb has to be located at least 1' 6"" off a column line. Exercise caution with framed opening in an endwall, the endposts may have to be relocated to accommodate opening. Also, exercise caution with framed openings in a sidewall, bracing may have to be relocated to accommodate opening and special doors may be required in low clearance areas.

Feature	Benefit
1. Furnished with or without header and jamb cover trim.	1. Cost versus aesthetics

Click here to fill out Our Quote Request Form.

American Steel Buildings, LLC.

1-800-511-3670

amsteelbld@aol.com

Click here for a Steel Building Quote.

Click here to view information on the process of buying a steel building.