American Steel Buildings, LLC   1-800-511-3670      Copyright 2010 Home  I  About Us  I  Contact Us  I  Buying Process  I  F.A.Q. WMP-VRR Faced Fiberglass Insulation for Metal Building and Steel Building System   Vinyl Reinforced Replacement is a triple ply laminate of a white polypropylene film with a metallized polyester film backing and a fiberglass scrim tear stopper. It is an excellent vapor retarder and low temperature workability. Water Vapor transmission rate (ASTM-E-96) of .02 Perms. Light Reflectivity (ASTM C-523, illuminant D-6500 = 85%. Cold Weather Workability = 0 deg. F. Bursting Strength of 90 psi.   WMP-50 Faced Fiberglass Insulation for Metal Building and Steel Building System   Poly Scrim Polyester is a .0015" thick UV Stabilized White Polypropylene facing with fiberglass scrim reinforcement and a .0005" thick Metallized Polyester backing. It has excellent strength and puncture resistance. It has a decorative, embossed finish as well as good low temperature workability. It is an excellent Vapor Barrier. Water Vapor transmission rate (ASTM-E-96) of .02 Perms. Light Reflectivity (ASTM C-523, illuminant D-6500 = 80%. Cold Weather Workability = 20 deg. F. Bursting strength of 120 psi. Gym Guard Faced Fiberglass Insulation for Metal Building and Steel Building System   Gym Guard is a .0015" thick White Metallized Polypropylene Film adhered to a Fiberglass Polyester Blend fabric weighing 75 lbs. per 3000 sq. ft. It has excellent strength and puncture resistance as well as light reflectivity, making it an excellent fabric for exposed interior surfaces in gymnasiums and auditoriums. Water Vapor transmission rate (ASTM-E-96) of .02 Perms. Light Reflectivity (ASTM C-523, illuminant D-6500 = 85%. Cold Weather Workability = 0 deg. F. Bursting strength of 250 psi. * Special order item, minimum order quantities may apply. Tab options- (1) 6" Tab or 2 - 3" Tabs. 1 - 6" Tab will be provided on one side of the insulation rolls with no tab on the other side of the roll. Usually 1 - 6" Tab is used when the erector is going to use spray adhesive to seal the insulation roll side joints. 2 - 3" Tabs will be provided on both sides of the insulation rolls. 2 - 3" Tabs are usually used when the insulation roll side joints are going to be folded and stapled. Unless specifically called out in a specification, this is strictly a preference of the erector. Available Insulation Thickness:  R-10  3.0"     36", 48", 60", 72"  Custom Laminated to Length.  R-13 4.0"     36", 48", 60", 72"    Custom Laminated to Length.  R-19  6.0" 36", 48", 60", 72"   Custom Laminated to Length. * R-11 (3.5”) & R-16 (5”) insulation available on request   American Steel Buildings Insulation - Agricultural - Aircraft Hangars - Automotive - Boat Storage - Church Buildings - Commercial/ Retail - Custom Design - Equestrian - Manufacturing - Mini-Storage - Office Buildings - Personal Garage - Pre-Engineered - Recreational - Warehouses Roof Panels PBR Double-Lok Retro-R Craftsman Lok-Seam Wall Panels PBR PBA PBU Insulated Panels Liner Panels Color Charts Ultra-Dek Batten-Lok Super-Lok Traditional Shadow-Rib Nu-Wall Primary - Gable Symmetrical - Gable Unsymmetrical - Single Slope - Lean-To Secondary - Purlins - Girts - Eave Struts - Base Condition - Building Design - Quote Request - Canopies - Eave Trim - Framed Openings - Insulation - Louver Vents - Mansards/ Facades - Overhead Doors - Parapet Walls - Partition Walls - Purlin Extensions - Roof Vents - Skylights/ Wall-Lights - Sliding Doors - Walk Doors - Windows Call Us Today for a Building Quote and be sure to let us know If you would like an option to include Insulation with your building 1-800-511-3670 Home > Accessories > Insulation Steel  Buildings American