SSP Roof Panels

Description: The SSP Standing Seam Roof Panel with the patented VersaLok sidelap connection. The panel is a true factory foamed-in-place trapezoidal roof panel with a standing seam offering superior weathertightness. With the IPS patented VersaLok sidelap, the roof panels snap together before being mechanically seamed. This Tecfoam panel is filled with non CFC polyurethane modified isocyanurate achieving R-values up to 39.5.

Dimensions: Nominal 36" coverage; Thickness (T) � 2", 21/2", 3", 4" and 5".

Material: Exterior � 24 ga. steel (std). 26 and 22 ga. also available.
Interior � 26 ga. steel (std). 24 and 22 ga. also available.

Finish Options: Exterior � Galvalume Plus
Dura-20 (silicone polyester)
Royal K-70 (Kynar 500/Hylar 5000)

Texture: The exterior skin is smooth as a standard and available embossed as an option. The interior skin is embossed only.

Length: The maximum recommended length is 35'-0". Contact IPS for panel length options.

Test Data

Test	Purpose	Procedure	Results
Thermal Resistance	Determines insulating properties of the panels	ASTM C 236 Guarded Hot Box	Good R values for an HCFC Foam System (see published values for panel type and thickness)
Air Leakage	Measures air leakage through the panel joints	ASTM E 283 Chamber Method	The leakage rate for the SSP panel will not exceed 0.01 CFM/SF at 40 psf pressure differential
Water Penetration	Measures water leakage through the panel joints	ASTM E 331 Chamber Method	No water penetration at pressure differential of 50 psf for the SSP panel
Strength	Determines the load/span properties of the roof and wall panels	ASTM E 72 Chamber Method	Panel load/span and deflection tables are available
Wind Uplift	Determines uplift resistance of roof panels in high winds	Underwriters Laboratories UL 580	SSP Roof Panels have a Class 90 rating with a 7'- 0" purlin spacing
	Determines uplift resistance of roof panels in high winds	Factory Mutual STD. 4471(1995)	SSP Roof Panels have a Class 1-75 and 1-90 rating with a 5'- 0" purlin spacing
	Determines ultimate uplift capacity of roof panels	ASTM E 1592	SSP Roof Panels have an ultimate uplift capacity of 100 psf with a 6'- 0" purlin spacing
Ignition Properties	Determines ignition temperatures of the panel core material	ASTM D 1929	Self-ignition temperature is 860 degrees F. Flash-ignition temperature is 842 degrees F.
Surface Burning	Determines the surface burning characteristics of the core and panels	Underwriters Laboratories UL 723 (ASTM E 84)	Core Material (5") Flame Spread 20, Smoke Developed 400 Finished Panels 2" to 5" Panel Flame Spread 15, Smoke Developed 250 - 450
Room Fire Test	Evaluates the burning of roof and wall panels in a room configuration	Factory Mutual STD. 4880 (1994) (UBC 17-5)	All wall and roof panels are rated Class 1 to 30 ft. high, 5 in. max. thickness
Roof Deck Fire Test	Evaluates the burning of roof deck panels from internal fire	Underwriters Laboratories UL 1256 Southwest Research Institute UBC STD. 17-4	The SSP Roof Panels satisfactorily meet the acceptance requirements
Roof Covering Fire Test	Evaluates the burning of roof covering from external fire	Underwriters Laboratories UL 790 (ASTM E 108)	The SSP Roof Panel is rated Class A
Roof Covering Fire Test	Evaluates the burning of roof covering from external fire	Factory Mutual STD. 4471 (1995) (ASTM E 108)	The SSP Roof Panel is rated Class A

*The numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

Thermal Properties

SSP Roof Panel
Product Code	Thickness	"U" Factor	"R" Factor
SSP 200	2"	.067	14.9
SSP 250	2 1/2"	.053	19.0
SSP 300	3"	.043	23.1
SSP 400	4"	.032	31.3
SSP 500	5"	.025	39.5

Note: Insulation values determined by tests conducted in accordance with ASTM C 236 at a mean temperature of 75 degrees F., winter condition corrected to 15 mph outside and still inside.

"SSP" ROOF PANEL with VersaLok

Test Data

Thermal Properties